- Home
- Products
- Furniture, Kitchen & Living Solutions
- Connectors & Shelf Supports
- Connectors
- Adhesive insert, for aerofix 100

Adhesive insert, for aerofix 100
For drill hole Ø 10 mm














- Technology
- Pull-out strengths
Aerofix 100 Adhesive insert | |
---|---|
Häfele developed the Aerofix 100 adhesive insert as a variably adjustable screw-on point for lightweight panels with a top layer of 4 mm, also known as an adhesive dowel. The insert makes it possible to absorb high pressure, pull and shearing forces. In order to absorb the forces the Aerofix 100 bypasses the core mechanically and chemically and therefore connects the two 4 mm top layers, achieving considerably better pull-out resistance than sleeves that are fitted at one side. Possible thickness differences in lightweight panels are easily compensated for. The housing engages mechanically into the upper top layer providing a secure connection, and lies flat against the lower top layer. Therefore the mounting lugs must engage beneath the top layer. An extremely expansive single component PUR adhesive is metered by storing it in the housing in an integrated adhesive cartridge. When the insert is pushed into the drill hole, the inner element is pushed into the housing and the adhesive is forced out of the cartridge. Therefore the chemical process is triggered, without having to use additional tools to apply the adhesive. Fully cured within 16 hours. | |
![]() | ⓐ Adhesive cartridge ⓑ Housing ⓒ Inner part |
![]() | |
Lightweight panel with 4 mm thin chipboard top layer | |
![]() | ![]() |
Application with Rafix HC |
-
Technical documents available.
Please select an article.


Adhesive insert, for aerofix 100
For drill hole Ø 10 mm –
Drilling depth D = panel thickness – top layer thickness














Note: The image may show a similar article
Note
Please select an article via the features or article table in order to add it to the cart.