Add article to cart via the article number:
Table bases with and without frames are constructed and function in different ways.
Table with frame = one-piece table base
Table without frame = multi-piece table base
The separable table tops are pushed apart. The table base remains unchanged.
The separable table bases with fixed table top are pushed apart.
Following applies for both tables with frame and without frame:
Min. width 400 mm, Standard 500 mm, Comfort 600 mm, one extension leaf provides additional seating for 2 people.
Only one table side must be pulled out. The opposite side of the table is then extended automatically.
Both table sides must be pulled out separately.
Without locking mechanism
For locking the pull out table fitting in extended position additional fittings are required (table top swivel bolts, locking hooks or spring clips).
With locking mechanism
The locking mechanism is integrated in the pull out table fitting. No further fittings are required.
Notes on construction
Note on choice of pull out table fitting
ⓐ= width of extension leaf
ⓛ= installation length of pull out table fitting
ⓑ= total extension length of pull out table fitting
ⓔ= opening for extension leaf
If the installation length L is less than approx. length of frame/base or table Ø, this may lead to malfunction or sagging of the table top.
open table frame
Separate extension leaf on end side
Separate extension leaf
Note: Folding fitting must be ordered separately in addition to the pull out table fitting.
Order Hospa Ø 4.5 countersunk screws separately
Installed length 800 mm, opening for insert 610 mm
Note: The image may show a similar article