Add article to cart via the article number:
Häfele supplies sliding door fittings for any application under the Slido brand. These fittings are particularly outstanding because of the wide range of different combination options.
|
Variants:
Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered
Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room
Variants:
Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered
Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room
Variant:
Fold – these fittings are suitable for creating folding walls
Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.
Their ease of installation is truly impressive, and also have the following advantages when they are being used:
Following types of glass are mainly used for glass sliding doors:
|
Sliding door fittings can be differentiated according to the number of leaves and the type of opening.
A | 1-leaf sliding doors The door is opened to one side in front of a wall |
![]() |
B | 1-leaf sliding doors The door is opened to one side into a wall pocket |
![]() |
C | 2-leaf sliding doors (e.g. Hawa Telescopic) Parallel opening of two door leaves to the right or to the left |
![]() |
D | 2-leaf sliding doors (e.g. Slido Classic Synchro or Hawa Symmetric) Symmetrical opening of two door leaves; manually or automatic |
![]() |
E | 4-leaf sliding doors (e.g. Hawa Telescopic) Parallel opening of two door leaves and simultaneous symmetrical opening of all four leaves (only wooden sliding doors) |
![]() |
F | 1 and 2-leaf curved sliding doors Curved sliding doors can be realised using curved running tracks and a special fitting. The segment size of a door leaf must not exceed a quarter circle |
![]() |
Soft and self closing mechanism on one side, preferably at the closing side, fitting comes with minimum door leaf width information |
![]() |
Soft and self closing mechanism on both sides,fitting comes with minimum door leaf width information |
![]() |
2 running gears
2 clamp shoe with hanger bolt M10
2 track buffers with adjustable retaining spring
1 rubber wall buffer
1 clear threshold floor guide, for glass thickness 8, 10, 12 (12.7) mm
Order 2 sets for 2-leaf sliding doors.
Top hung system – For 1 door
Section trolley hanger and guide track
Section trolley hanger and guide track
Clamp shoes mounted outside, with continuous clip panel
TB = door width
Clamp shoes mounted offset inwards, clip panel conceals only the clamp shoe
Clamp shoes mounted offset inwards, clip panel conceals only the clamp shoe
Required glass cut-out
Clamp shoes mounted outside, clip panel conceals only the clamp shoe
Required glass cut-out
Note: The image may show a similar article