Re-circulating ball carriage, for Accuride 0116 linear runners

  • CAD data available.
    Please select an article.

    Filter

    Complete your selection

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    Re-circulating ball carriage, for Accuride 0116 linear runners

    • Wall mounting

    • Ceiling installation

    • Floor mounting

    • Installation

      see key

      Supplied in a plastic sleeve because the balls are loose in the ball carriage.
      To prevent the balls from falling out when installing the ball carriage, press the plastic sleeve against the aluminium track, then carefully slide the ball carriage into the aluminium track. Then fit the end stops.

    • Installation

    Note: The image may show a similar article

    Re-circulating ball carriage, for Accuride 0116 linear runners

    With stainless steel balls

    Art. no. 421.59.811

    Re-circulating ball carriage, for Accuride 0116 linear runners

    With plastic balls

    Art. no. 421.59.812
    Product details

    Track with ball bearing mounted carriage for sliding base units, table tops or display walls
    Linear motion guide and ball bearing carriage
    Corrosion resistant
    Load bearing capacity determined by mounting psotion and number of ball bearing carriages. Please see catalogue page for info.
    Weight must be evenly distributed over the rec-circulating ball carriages
    The specified values apply to performed test distance of 80,000 m
    Fix track as recommended on rigid or flat surface

    • Grease free and smoth running
      Installation: The balls are inserted loosely into the re-circulating ball carriage therefore it is supplied packed in a plastic envelope. In order to avoid losing balls during installation of the re-circulating ball carriage, the plastic envelope must be pressed against the aluminium track and the re-circulating ball carriage must be slid carefully into the aluminium track. Finally install end stops.

    Area of application

    For sliding objects horizontally, such as cabinets, claddings, display walls etc.

    Suitable for

    Accuride 0116 linear runners

    Thread

    M6

    Length

    177 mm

    Width

    65 mm

    Height

    25 mm

    Installation

    For screw fixing

    Installation reference

    Supplied in a plastic sleeve as balls are loose in the ball carriage. To prevent the balls from falling out when installing the ball carriage, press the plastic sleeve against the aluminium track, then carefully slide the ball carriage into the aluminium track. Then fit the end stops.

    Order reference

    Tracks, end stops, M6 fixing screws and accessories to be ordered separately

    Complementary products and accessories
    Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
    Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
    19-Aug-2022