Add article to cart via the article number:
Other colours available on request.
Sealing profiles which are painted over or used for renovation purposes must always be tested for their compatibility with the lacquer.
Irrespective of the specifications for paint compatibility, testing should always be carried out.
When complying with the stipulated drying cycles, the compatibility is given for following coating systems:
Sealing profiles made from modified elastic polymer (PVC)
Sealing profiles made from thermoplastic elastomer (TPE) or cross-linked silicon
Not suitable for coating are following:
Modified elastic polymer (PVC)
Thermoplastic elastomer (TPE)
Areas of application
Rebate seals for room doors are mounted in the groove of the frame or door.
Depending on the version, the bottom part of the seal is inserted directly into the groove (fig. 1) or the seal must be fitted with a carrier (fig. 2). Rebate seals for front doors are fitted in the door (fig. 3).
For interior doors
M 680 beige
Note: The image may show a similar article