Sliding door fitting, Slido Design 80-M, set

for 1-leaf glass sliding doors, wall installation, concealed running system, for door weights up to 80 kg –, with running track, for glass thickness: 10 mm, length: 1,800 mm

Art. no. 940.59.007

  • Sliding door applications
  • Slido – Sliding door fittings from Häfele

    Häfele supplies sliding door fittings for any application under the Slido brand.

    These fittings are particularly outstanding because of the wide range of different combination options.

     
     
    • Slido sliding door systems are available for wall mounting or ceiling installation
    • There are many different facing options for Slido sliding door systems
    • Slido sliding door systems can be used for door weights from 40 to 240 kg
    • Slido sliding door systems are also available with electric drive

    Sliding door applications

    Fittings for wooden sliding doors
    • Space-saving room elements block the view of the areas behind them
    • Combination with coloured surfaces
    • Modern room design

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for glass sliding doors
    • Space-saving room elements
    • Brightness and transparency in the rooms
    • Modern room design using coloured or textured glass
    • Combination with fixed glass panel elements

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for folding walls
    • Space-saving room elements
    • Room division
    • Large passageways can be partitioned off
    • Space-saving, folded door stack when open

    Variant:

    Fold – these fittings are suitable for creating folding walls

     
     

    Soft closing systems from Häfele

    Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.

    Their ease of installation is truly impressive, and also have the following advantages when they are being used:

    • Noise reduction
    • Lower accident risk
    • Increased operating convenience
    • Material-friendly
    • Sliding doors that close gently and quietly increase comfort in the living and working environments.
     
     
  • Information on glass sliding doors
  • Fittings for glass sliding doors

    Following types of glass are mainly used for glass sliding doors:

    • Glass door made from tempered safety glass for glass thickness of 6, 8, 10, 12 and
    • 16 Glass doors made from laminated glass for glass thickness of 6–12.7 mm
    Door leaf connection
    • Clamped door leaf connection Door leaf attached by clamping with or without additional point suspension
    installation
    • Positive-fit glass clamp connection Positive-fitting glass clamp connection is a point suspension with glass preparation.
    • Glass clamp connection (without positive-fitting connection) Glass clamp connection is a point suspension without glass preparation.
    Floor guides
    • Standard floor guideWith this type of floor guide, there is a small amount of play in the guide
    • Clear threshold floor guideA clear threshold floor guide is an adjustable guide that can be individually adapted to any glass thickness within the adjusting range.
    • Guide trackSliding doors can be optionally guided in a guide track at the bottom.
    Track buffers/track stoppers
    • Stop buffer without retaining spring.
    • Track buffer with retaining spring.The retaining spring allows the sliding door to be held in a closed or open position.
     
     

    Opening options with wooden and glass sliding doors

    Sliding door fittings can be differentiated according to the number of leaves and the type of opening.

    A

    1-leaf sliding doors

    The door is opened to one side in front of a wall

    B

    1-leaf sliding doors

    The door is opened to one side into a wall pocket

    C

    2-leaf sliding doors (e.g. Hawa Telescopic)

    Parallel opening of two door leaves to the right or to the left

    D

    2-leaf sliding doors (e.g. Slido Classic Synchro or Hawa Symmetric)

    Symmetrical opening of two door leaves; manually or automatic

    E

    4-leaf sliding doors (e.g. Hawa Telescopic)

    Parallel opening of two door leaves and simultaneous symmetrical opening of all four leaves (only wooden sliding doors)

    F

    1 and 2-leaf curved sliding doors

    Curved sliding doors can be realised using curved running tracks and a special fitting. The segment size of a door leaf must not exceed a quarter circle

    Soft and self closing mechanism variants for sliding doors

    Soft and self closing mechanism on one side, preferably at the closing side, fitting comes with minimum door leaf width information

    Soft and self closing mechanism on both sides,fitting comes with minimum door leaf width information

    Filter

    Complete your selection

    for 1-leaf glass sliding doors, wall installation, concealed running system, for door weights up to 80 kg –, with running track, for glass thickness: 8 mm, length: 1,100 mm

    Art. no. 940.59.007

    Art. no. 940.59.004

    for 1-leaf glass sliding doors, wall installation, concealed running system, for door weights up to 80 kg –, with running track, for glass thickness: 10 mm, length: 1,100 mm

    Art. no. 940.59.007

    Art. no. 940.59.005

    for 1-leaf glass sliding doors, wall installation, concealed running system, for door weights up to 80 kg –, with running track, for glass thickness: 8 mm, length: 1,800 mm

    Art. no. 940.59.007

    Art. no. 940.59.006

    for 1-leaf glass sliding doors, wall installation, concealed running system, for door weights up to 80 kg –, with running track, for glass thickness: 10 mm, length: 1,800 mm

    Art. no. 940.59.007

    Art. no. 940.59.007

    Your search for null returned no results.

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    GR Min. 1
    See Required Products
    Article details

    Model

    80-M

    Packing

    1 pieces

    Suitable for

    For glass doors

    Area of application

    For 1-leaf sliding doors
    for hard floors (laminate, PVC, tiles) and soft floors (carpet, cork – only in conjunction with bottom track for soft floors)

    Version

    Running system concealed in door profile

    For glass thickness

    Tempered safety glass: 8 mm and 10 mm

    Door width

    800–1,800 mm

    Door weight

    ≤80 kg

    Installation

    Wall mounting, floor must be even and level

    Adjustment

    Height +2 mm
    Show more information
    Product Features

    Supplied with

    1 running track

    1 running gear

    9 spacer plates (3 x 1 mm, 3 x 2 mm and 3 x 3 mm)

    2 soft and self closing mechanisms

    2 guide rollers, bottom

    1 set of end caps

    2 spacers

    1 panel for running track

    1 clip-on profile for glass for guide profile

    1 guide profile, bottom

    1 floor guide

    Required products

    Sliding door fitting, Slido Design 80-M, set


    GRMin 1
    This product has 1 required products

    Running rail, For soft floors

    Art no.

    Packing

    04-Apr-2020

    Sliding door fitting, Slido Design 80-M, set

    for 1-leaf glass sliding doors, wall installation, concealed running system, for door weights up to 80 kg – with running track, for glass thickness: 10 mm, length: 1,800 mm

    • Wall mounting

      Floor guide on hard floors

      see key

      G = glass height

    • Installation

      Floor guide on soft floors with bottom track

    • Drilling pattern

    • Drilling pattern

    • Section running gear and floor guide

      see key

      H = door height

      MH = installation height

      H2 = internal opening height

      X = internal opening width

    • Door installation

      Other mounting options can be found in the installation instructions.

    Note: The image may show a similar article