Supporting pin, For drill hole Ø 5 mm, for plug fitting

Zinc alloy –, Bright, for drill hole Ø: 5 mm, length L: 11 mm

Art. no. 263.20.073

  • Rafix 20 and 30 System

    The Rafix 20 and Rafix 30 RTA connector systems have zinc alloy tightening elements that are based on the centric principle.

    The advantages are:

    • Secure tightening, even after repeated slackening and re-tightening
    • No displacement of side panels, because bolts are centrally guided.
    • Tolerances are compensated for by long tightening distance
    • Comfortable tightening with drive tool in 25° position
    • All drilling operations take place on a flat surface

    A comprehensive range of connecting bolts, sleeves and accessories for any installation situation is available for the Rafix 20 and the Rafix 30 connector systems.

     
  • Rafix 20 and 30 System

    The Rafix 20 and Rafix 30 RTA connector systems have zinc alloy tightening elements that are based on the centric principle.

    The advantages are:

    • Secure tightening, even after repeated slackening and re-tightening
    • No displacement of side panels, because bolts are centrally guided.
    • Tolerances are compensated for by long tightening distance
    • Comfortable tightening with drive tool in 25° position
    • All drilling operations take place on a flat surface

    A comprehensive range of connecting bolts, sleeves and accessories for any installation situation is available for the Rafix 20 and the Rafix 30 connector systems.

     
    Rafix 20
    • Connector housing made from zinc alloy or plastic
    • Connector housing without dowel
    • With tightening element for tightening and fixing of the components
    • Only one drill hole
    • Small design
    • With or without rim (zinc alloy housing available only with rim)
    • Connector housing made from zinc alloy or plastic
    • Connector housingwith dowel
    • With tightening element for tightening and fixing of the components
    • Can be used for alignment, the dowel provides accurate positioning
    • Better pull-out strengths
    • Valuable, robust appearance
    Rafix 20 Tab
    • Shelf connector housing made from plastic
    • Shelf connector without dowel
    • Without tightening element
    • With design and drilling dimensions identical to Rafix 20
    • Tightening in slightly angled position
    • Installation and removing by pushing on and lifting the connecting bolt, no tools required
    • With rim
    Rafix 30
    • Connector housing made from plastic
    • Connector housingwith dowel
    • With tightening element made from zinc alloy for tightening and fixing of the components
    • Can be used for alignment, the dowel provides accurate positioning
    • High tolerance range (± 0.5 mm), compensation through long tightening distance (2.5 mm)
    • High pull-out strengths
    • For heavy loads

    Installation

    The Rafix 20 and 30 have two types of recess to accommodate the connecting bolt:

    (1) Without ridge:

    (2) With ridge:

    The shelves can be inserted from the frontand from above.

    The shelves can only be inserted from above; The cabinet elements are therefore pre-assembled.

    Access from above to the tightening element is possible due to the specially designed housing. Concealed installation of the connectors is therefore possible (e.g. with shelves) and tightening via a Ø 10 mm through hole. The through hole is then concealed using a cover cap.

    Comfortable tightening of the connector from underneath with screwdriver in 25° position.

  • Montage

    Die Verbindergehäuse Rafix 20 und 30 weisen zur Aufnahme eines Verbindungsbolzens zwei Ausführungen auf:

    (1) ohne Wulst:

    (2) mit Wulst:

    Die Konstruktionsbödenkönnen stirnseitig und von oben eingesetzt werden.

    Die Konstruktionsböden können nur von oben eingesetzt werden; dadurch sind die Bauteile vorfixiert.

    Durch die spezielle Konstruktion der Gehäuse ist ein Zugriff von oben auf das Anzugselement möglich. Dadurch können die Verbinder, z.B. bei Bodentablaren, verdeckt eingebaut und über eine 10-mm-Durchgangsbohrung verspannt werden. Die Durchgangsbohrung wird danach mit einer Abdeckkappe verdeckt.

    Das Anziehen des Verbinders von unten erfolgt komfortabel durch 25°-Stellung des Schraubendrehers.

  • Rafix 20
    • Connector housing made from zinc alloy or plastic
    • Connector housing without dowel
    • With tightening element for tightening and fixing of the components
    • Only one drill hole
    • Small design
    • With or without rim (zinc alloy housing available only with rim)
    Rafix 20 Tab
    • Shelf connector housing made from plastic
    • Shelf connector without dowel
    • Without tightening element
    • With design and drilling dimensions identical to Rafix 20
    • Tightening in slightly angled position
    • Installation and removing by pushing on and lifting the connecting bolt, no tools required
    • With rim

    Zinc alloy –, Bright, for drill hole Ø: 5 mm, length L: 11 mm

    Art. no. 263.20.073

    Art. no. 263.20.073
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    ST Min. 100
    See Required Products
    Article details

    Length L

    11 mm

    Drill hole

    5 mm

    Material

    Zinc alloy

    Finish

    Bright

    Packing

    100 or 2000 piece
    21-Oct-2019

    Supporting pin, For drill hole Ø 5 mm, for plug fitting

    Zinc alloy – Bright, for drill hole Ø: 5 mm, length L: 11 mm

    Note: The image may show a similar article

    Note

    Please select an article via the features or article table in order to add it to the cart.