Home New Zealand
-
Products
- Furniture & Door Handles
-
Furniture, Kitchen & Living Solutions
- Kitchen Solutions
- Bathroom Accessories & Sanitary Hardware
- Home & Living Solutions
- Office Fittings & Shopfittings
- Table Fittings, Legs, Feet & Castors
- Drawers, Drawer Systems & Runners
- Furniture Hinges
- Flap Fittings & Stays
- Door Accessories, Buffers & Stops
- Connectors & Shelf Supports
- Locks, Catches & Bolts
- Architectural Hardware
- Sliding, Folding & Tambour Door Fittings
- Lighting & Electrical Fittings
- Tools & Consumables
- Industry
- Service
- About Häfele
Add article to cart via the article number:
- Home
- Products
- Furniture, Kitchen & Living Solutions
- Connectors & Shelf Supports
- Connectors
- Connector housing, Rafix 20 system, with dowel, zinc alloy
Connector housing, Rafix 20 system, with dowel, zinc alloy
With tightening element
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- Better pull-out strengths
- Valuable, robust appearance
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
- Connector housing made from plastic
- Connector housing with dowel
- With tightening element made from zinc alloy for tightening and fixing of the components
- Can be used for alignment, the dowel provides accurate positioning
- High tolerance range (± 0.5 mm), compensation through long tightening distance (2.5 mm)
- High pull-out strengths
- For heavy loads
- Connector housing made from zinc alloy or plastic
- Connector housing without dowel
- With tightening element for tightening and fixing of the components
- Only one drill hole
- Small design
- With or without rim (zinc alloy housing available only with rim)
- Shelf connector housing made from plastic
- Shelf connector without dowel
- Without tightening element
- With design and drilling dimensions identical to Rafix 20
- Tightening in slightly angled position
- Installation and removing by pushing on and lifting the connecting bolt, no tools required
- With rim
| Rafix 20 |  | ||
 | |||
| Rafix 20 Tab |  | ||
| Rafix 30 |  | ||
Montage
Die Verbindergehäuse Rafix 20 und 30 weisen zur Aufnahme eines Verbindungsbolzens zwei Ausführungen auf:
(1) ohne Wulst: |  |  | (2) mit Wulst: |  |  | |||||
Die Konstruktionsbödenkönnen stirnseitig und von oben eingesetzt werden. | Die Konstruktionsböden können nur von oben eingesetzt werden; dadurch sind die Bauteile vorfixiert. | |||||||||
 | |
Durch die spezielle Konstruktion der Gehäuse ist ein Zugriff von oben auf das Anzugselement möglich. Dadurch können die Verbinder, z.B. bei Bodentablaren, verdeckt eingebaut und über eine 10-mm-Durchgangsbohrung verspannt werden. Die Durchgangsbohrung wird danach mit einer Abdeckkappe verdeckt. Das Anziehen des Verbinders von unten erfolgt komfortabel durch 25°-Stellung des Schraubendrehers. |
| Rafix 20 | | ||
| Rafix 20 Tab | | ||
Product details
Material
Zinc alloy tightening element
Drive
Connector housing, Rafix 20 system, with dowel, zinc alloy
With tightening element
Rafix 20 with dowel
Optional: 10 mm through hole for locking from above
Note: The image may show a similar article
