Furniture butt hinge, brass, for butting overlay doors

Crank L1

  • Butt hinges

    Left hand or right hand hinge

    To distinguish between hinges with screw-on flanges, view them in open position from the front against the countersunk screw hole side.

    If the female flange (= door flange) is on the left, it is a left hand hinge. If it is on the right, it is a right hand hinge.

     
     
     
     
     

    ⓐ = female flange (= door flange)

     

    ⓑ = male flange (= side flange)

    Left hand hinge

    Right hand hinge

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Crank

    There are 5 different types of crank.

     

    Crank A, straight hinge

    For butting inset or overlay doors.

    The hinge pin is positioned centrally between the two flanges.

    Crank B

    For set back doors.

    One flange is cranked by the material thickness.

    Crank C

    Crank C is equivalent to crank B, but causes the door to protrude.

    Crank D

    For rebated doors, with shorter female flange.

    Crank L1

    For butting overlay doors. Door opening angle 270°. The hinge has an external knuckle.

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Number of furniture hinges per door

    The number of concealed hinges per door depends on:

    • Door width and height
    • Door weight
    • Door material

    The number of furniture hinges shown in the diagram is a recommendation and provides a guideline for 600 mm wide doors made from 19 mm chipboard. Trial mounting is recommended. The distance X between the furniture hinges must always be as long as possible for stability reasons.

    According to the example diagram two furniture hinges have to be fitted with a door height of 900 mm.

  • Butt hinges

    Left hand or right hand hinge

    To distinguish between hinges with screw-on flanges, view them in open position from the front against the countersunk screw hole side.

    If the female flange (= door flange) is on the left, it is a left hand hinge. If it is on the right, it is a right hand hinge.

     
     
     
     
     

    ⓐ = female flange (= door flange)

     

    ⓑ = male flange (= side flange)

    Left hand hinge

    Right hand hinge

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Crank

    There are 5 different types of crank.

     

    Crank A, straight hinge

    For butting inset or overlay doors.

    The hinge pin is positioned centrally between the two flanges.

    Crank B

    For set back doors.

    One flange is cranked by the material thickness.

    Crank C

    Crank C is equivalent to crank B, but causes the door to protrude.

    Crank D

    For rebated doors, with shorter female flange.

    Crank L1

    For butting overlay doors. Door opening angle 270°. The hinge has an external knuckle.

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Number of furniture hinges per door

    The number of concealed hinges per door depends on:

    • Door width and height
    • Door weight
    • Door material

    The number of furniture hinges shown in the diagram is a recommendation and provides a guideline for 600 mm wide doors made from 19 mm chipboard. Trial mounting is recommended. The distance X between the furniture hinges must always be as long as possible for stability reasons.

    According to the example diagram two furniture hinges have to be fitted with a door height of 900 mm.

    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    NONE Min. 1
    See Required Products

    307.01.627 CRANKED HINGE NICKEL MATT RH 50MM

    Crank L1 –, nickel-plated matt, right mounting

    307.01.636 CRANKED HINGE NICKEL MATT LH 50MM

    Crank L1 –, nickel-plated matt, left mounting

    307.01.823 CRANKED HINGE BRASS POL RH 50MM

    Crank L1 –, polished, right mounting

    307.01.832 CRANKED HINGE BRASS POL LH 50MM

    Crank L1 –, polished, left mounting

    Product details

    Material

    Brass (profile material thinly drawn)

    Flange thickness

    2

    Diameter

    8

    Crank

    L1

    Door thickness

    20 - 21

    Installation

    For screw fixing
    Show more information
    Complementary products and accessories
    23-Jul-2019

    Furniture butt hinge, brass, for butting overlay doors

    Crank L1 –

    • Polished

    • see key

      Matt nickel plated

    • Crank L1

    Note: The image may show a similar article

    Note

    Please select an article via the features or article table in order to add it to the cart.