Sliding door fitting, Woodflex 80, set

For room-high wooden sliding doors, compatible with Silent Aluflex, with soft closing mechanism (optional), for door weights up to 80 kg, for door heights up to 3,000 mm –, For 1 doors

Art. no. 403.50.941

  • Slido – Sliding door fittings from Häfele

    Häfele supplies sliding door fittings for any application under the Slido brand.

    These fittings are particularly outstanding because of the wide range of different combination options.

     
     
    • Slido sliding door systems are available for wall mounting or ceiling installation
    • There are many different facing options for Slido sliding door systems
    • Slido sliding door systems can be used for door weights from 40 to 240 kg
    • Slido sliding door systems are also available with electric drive

    Sliding door applications

    Fittings for wooden sliding doors
    • Space-saving room elements block the view of the areas behind them
    • Combination with coloured surfaces
    • Modern room design

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for glass sliding doors
    • Space-saving room elements
    • Brightness and transparency in the rooms
    • Modern room design using coloured or textured glass
    • Combination with fixed glass panel elements

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for folding walls
    • Space-saving room elements
    • Room division
    • Large passageways can be partitioned off
    • Space-saving, folded door stack when open

    Variant:

    Fold – these fittings are suitable for creating folding walls

     
     

    Soft closing systems from Häfele

    Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.

    Their ease of installation is truly impressive, and also have the following advantages when they are being used:

    • Noise reduction
    • Lower accident risk
    • Increased operating convenience
    • Material-friendly
    • Sliding doors that close gently and quietly increase comfort in the living and working environments.
     
     
  • Fittings for wooden sliding doors

    Our product range includes fittings for wooden sliding doors with a maximum door weight of 500 kg.

    Fittings for wooden sliding doors consist of a fitting set and a running track. If necessary, further components can be added.

    Door leaf connection
    • Clamped door leaf connection
    • Screwed on door leaf connection
    • Recessed door leaf connection

    The door leaf is attached by groove mounting the fitting into the edge of the door. This makes the attachment invisible, and also reduces the gap sizes to a minimum.

     
    installation
    • Support profile – Flange clipThe suspension carriage is inserted or clipped into the support profile from the side (without tools).
    • Support flangeSupport flanges, suspension bars and the two-way suspension fitting are inserted from the side or the front. They are fitted to the door, which increases the installation height.
     
     
    Floor guides
    • Standard floor guidesThe floor guide is groove mounted into the edge of the door leaf. A small amount of play is required in the groove width with this type of floor guide.
    • Clear threshold floor guideA clear threshold floor guide is an adjustable guide that can be individually adapted to any door thickness/groove width within the adjusting range.
    • Guide trackSliding doors can be optionally guided in a guide track at the bottom.
     
     
    Track buffers/track stoppers
    • Stop buffer without retaining spring.
    • Track buffer with retaining spring.The retaining spring allows the sliding door to be held in a closed or open position.
     
     

    Opening options with wooden and glass sliding doors

    Sliding door fittings can be differentiated according to the number of leaves and the type of opening.

    A

    1-leaf sliding doors

    The door is opened to one side in front of a wall

    B

    1-leaf sliding doors

    The door is opened to one side into a wall pocket

    C

    2-leaf sliding doors (e.g. Hawa Telescopic)

    Parallel opening of two door leaves to the right or to the left

    D

    2-leaf sliding doors (e.g. Slido Classic Synchro or Hawa Symmetric)

    Symmetrical opening of two door leaves; manually or automatic

    E

    4-leaf sliding doors (e.g. Hawa Telescopic)

    Parallel opening of two door leaves and simultaneous symmetrical opening

    of all four door leaves (only wooden sliding doors)

    F

    1 and 2-leaf curved sliding doors

    Curved sliding doors can be realised using curved running tracks and a special fitting. The segment size of a door leaf must not exceed a quarter circle

    Soft and self closing mechanism variants for sliding doors

    Soft and self closing mechanism on one side, preferably at the closing side, fitting comes with minimum door leaf width information

    Soft and self closing mechanism on both sides,fitting comes with minimum door leaf width information

    For room-high wooden sliding doors, compatible with Silent Aluflex, with soft closing mechanism (optional), for door weights up to 80 kg, for door heights up to 3,000 mm –, For 1 doors

    Art. no. 403.50.941

    Art. no. 403.50.941
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available

    Note:
    To receive items as fast as possible, choose 'when available' at checkout.

    GR Min. 1
    See Required Products
    Article details

    Model

    Woodflex 80

    Door weight

    ≤80 kg

    Packing

    1 set

    Internal height

    Max. 3,000 mm

    Door weight

    ≤80 kg

    Door width

    500 – 1500 mm

    Adjustment

    –5/+6 mm on running gear (TS 20 drive)

    Version

    Plastic coated ball bearing

    Material

    Running gear: Steel, guide rollers: Plastic, axle: Steel

    Running gear

    Bottom running, 1 roller

    Installation

    Running track for recess mounting or glue fixing
    Show more information
    Required products

    Sliding door fitting, Woodflex 80, set


    GRMin 1
    This product has 9 required products

    Single running track, Bottom, for glue fixing

    Art no.

    Number

    Single running track, Bottom, for recess installation

    Art no.

    Number

    Double running track, Bottom, for glue fixing

    Art no.

    Number

    Double running track, for Slido Classic IF/Aluflex 80/Woodflex 80

    Art no.

    Triple running track, Bottom, for glue fixing

    Art no.

    Number

    Single guide track, Top, for screw fixing, height 60 mm

    Art no.

    Double guide track, Top, for screw fixing, height 60 mm

    Art no.

    Number

    Double guide track, Top, for screw fixing, height 70 mm

    Art no.

    Finish/colour

    Length

    Number

    Packing

    Triple guide track, Top, for screw fixing, height 60 mm

    Art no.

    Number

    15-Dec-2019

    Sliding door fitting, Woodflex 80, set

    For room-high wooden sliding doors, compatible with Silent Aluflex, with soft closing mechanism (optional), for door weights up to 80 kg, for door heights up to 3,000 mm – For 1 doors

    • see key

      Door height H

      With glued-on running track and guide track 60 mm:

      H = H1 – 50 mm

      With glued-on running track and guide track 70 mm:

      H = H1 – 60 mm

      With groove mounted running track and guide track 60 mm:

      H = H1 – 44 mm

      With groove mounted running track and guide track 70 mm:

      H = H1 – 54 mm

    • Installation

    • Installation

      see key

      Installation reference

      The roller is inserted from below and screwed to the door leaf through the middle hole.

    Note: The image may show a similar article